Yaler Library for Arduino

Yaler Library for Arduino
Author: Thomas Amberg
Contact: tamberg@yaler.net

Description | Download | Methods | Examples

Description

This library enables an Arduino board connected to a local network to become accessible from the Web, via the Yaler.net relay service.

Download

Download YalerEthernetServer.zip or browse the source code at http://www.bitbucket.org/yaler/yalercontrib/src/tip/Arduino/YalerEthernetServer.

This version works with the Ethernet shield. There is also a Yaler Arduino library for WiFi, a Yaler Arduino library for WiFi101, a Yaler Arduino library for CC3000 and a Yaler tutorial for the Arduino Yún.

Methods

YalerEthernetServer()

Description

Create a server that listens for incoming connections on the specified relay domain.

Syntax

YalerEthernetServer(const char *host, uint16_t port, const char *id);

Parameters

host
the relay host name or ip
port
the relay port
id
the relay domain

available()

Description

Gets a client that is connected to the server via the relay and has data available for reading.

Syntax

server.available()

Parameters

None

Returns

a Client object

Examples

YalerWebService

A minimal Web service accessible via the Yaler relay.

// Copyright (c) 2014, Yaler GmbH, Switzerland
// All rights reserved

#include <SPI.h>
#include <Ethernet.h>
#include <YalerEthernetServer.h>

// Enter a MAC address for your controller below.
// Some Ethernet shields have a MAC address printed on a sticker
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };

// Local EthernetServer at http://LOCAL_IP/ (e.g. http://192.168.0.7/)
//EthernetServer server(80);

// Get a relay domain at https://yaler.net/ to replace RELAY_DOMAIN below
// YalerEthernetServer is accessible at http://RELAY_DOMAIN.try.yaler.io/
YalerEthernetServer server("try.yaler.io", 80, "RELAY_DOMAIN");

void setup() {
  Serial.begin(9600);
  Serial.println("Acquiring IP address...");
  if (Ethernet.begin(mac) == 0) {
    Serial.println("DHCP failed.");
  } else {
    Serial.println(Ethernet.localIP());
    server.begin();
  }
}

void sendResponse(EthernetClient client) {
  client.print("HTTP/1.1 200 OK\r\n");
  client.print("Connection: close\r\n");
  client.print("Content-Length: 5\r\n");
  client.print("\r\n");
  client.print("Hello");
}

void loop() {
  EthernetClient client = server.available();
  if (client && client.connected()) {
    client.find("\r\n\r\n"); // Consume incoming request
    sendResponse(client);
    delay(1); // Give the Web browser time to receive the data
    client.stop();
  }
}

For more examples, see: http://www.bitbucket.org/yaler/yalercontrib/src/tip/Arduino

Share